Torque Wrench In The Red Box

Snap-on Industrial Brand CDI Torque Wrench

A torque wrench is going to be a crucial tool when you’re working on engines, machinery for aviation, as well as other industrial applications. These tools are precision instruments that is going to be the difference between a broken bolt due to over tightening, or a bolt falling off because it wasn’t tight enough.

The Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench goes the extra mile to ensure that those expectations are surpassed exponentially.

Snap-on Industrial Brand CDI Torque 2503MFRPH With Close-Up

In this review, we are going to talk a little more about the features of the Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench, but we are also going to give you an overview of what people who have purchased the torque wrench had to say about their overall experience with it.

Then, we’re going to give you our recommendation on whether or not this tool is something you should consider purchasing for your own tool box!

About The Product

CDI is a subsidiary company of Snap On, a well-known and well-respected name in tools. With the 1/2-inch drive, adjustable micrometer torque wrench, you’ll find that the dual scale has been calibrated to be able to do readings in both directions—clockwise and counterclockwise.

This technology is used to make the wrench give you an accurate reading each and every time—regardless if you’re working on your lawn mower out of your garage, or a client’s engine at the shop. With this tool, you can tackle it all.

Notable features of the Snap-on Industrial Brand CDI Torque include:

  • The scale is laser marked; it is a single scale
  • A two directional calibrated dual scale
  • Positive lock with a pull-down lock ring, which is spring loaded
  • Quick release buttons for fast and easy setup and socket retention
  • The torque ranges from 30 to 250-foot pounds

The Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench features a dual scale that has been laser calibrated to give you accurate readings in both directions. The wrench features a positive lock with a spring loaded lock ring. Because this torque wrench is fast and easy to use, you can tighten nuts, bolts, and other fasteners quickly and precisely.

The Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench also features quick release buttons that will give you good socket retention, as well as easy socket removal. The ergonomic comfort grip will give you the ability to apply torque between 30 to 250 ft/lbs.

What Others Say

When we looked at the user reviews, we saw that 93% had great things to say about the Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench and left 4 or 5-star reviews. Of these reviews, people commented on how easy it was to read the markings on the wrench. They found that the accuracy is within a 4% error margin, plus or minus.

They feel that for the amount of ft/lbs of torque you’re able to produce with accurate results. Customers like that the tool is relatively inexpensive, considering that the tool is very solid and has a high quality feel to it. Customers like that the ergonomic design makes the wrench easy to set up, and the quick release buttons doesn’t compromise the fastener when they are taking the wrench off.

Man Using Torque Wrench  On Car

They also like that the locking mechanism, which is a collar that needs to be pulled down, stays in place so they can work on fasteners with the same torque requirements without having to reset it for each item.

So what did the remaining 7% of customers who left 3-star or below reviews have to say? The most common complaint customers had was that the tool they received was “stripped out” and they hadn’t even had the opportunity to use the tool yet. Another customer felt that the calibration was severely off.

They discovered that their wrench was off by 10 pounds, which is a problem, especially for a brand new wrench. The customer did say they contacted customer support and received a replacement, but they reported back that the replacement broke within two weeks.

Customers also pointed out that you cannot store the tool at its calibration in its storage case because the case is too short. Not only is this an inconvenience, but it could mess with the calibration of the tool in the long term.

Customers said they don’t like that they have to be extra mindful about how they handle this tool. While accidents can happen, they feel that the tool shouldn’t lose its accuracy after just a few falls on the ground. One customer also said that they had a little trouble reading the tool in low light.

Final Verdict

If you’re looking for a torque wrench that is going to give you accurate readings that is well worth the under $175 price tag, then you may want to consider the Snap-on Industrial Brand CDI Torque Micrometer Torque Wrench.

This tool features a 1/2-inch drive adjustable micrometer that comes with a dual scale that has been calibrated to give you accurate readings in both directions. This technology has been used to create a device that will enable you to tighten fasteners to the required specifications set by manufacturers.

Torque Wrench By Snap On

The positive lock has a spring loaded locking mechanism that you can pull down to set the calibration, allowing you to move from one fastener to another without having to reset the tool each time.

We believe that for a top quality tool, you can’t go wrong with this torque wrench. The majority of customers who have purchased the tool and have been using it for a while, rave about the product. There are a few minor complaints, but since only a small handful of customers had these problems, it is safe to assume that it was just their particular tool and not a direct reflection of the tool or the brand.

Leave a Comment: